shale shaker screen

Dredging Material Treatment is always a big problem for local governments, especially for De-watering the material.

GN Solids Control can supply One Stop, Turnkey Solution for Dredging Material Treatment.

Last week, GN 1000 GPM dredging slurry separation system was delivered to work site for customer’s project starting celebration. It is the first unit standard configuration system for dredging slurry separation which showed that GN has made herself getting into a further level for river and lake sludge cleaning up.

Main Equipments for 1000GPM Dredging Slurry Separation System,
1. GNZS703 Shale shaker – 2 Units
2. GNZJ703-2S De-sander – 1 Unit
3. GNSB6x5-13 Sand Pump – 2 Units
4. Mud tank and accessories

Working Procedure,
The Dredging Slurry firstly go through the shale shakers, in order to remove the solids with more than 100 um. The slurry after the Shale Shaker Treatment would go through the De-Sander, in order to remove the the solids between 45~70 um. There are independent mud tanks under the shale shaker and De-sander, for collecting the liquid separately passing from the shale shaker and De-sander.

The two sand pumps are used for feeding material into the Shake Shaker and De-sander Separately.

GN also develops Decanter Centrifuge for removing fine solids (up to 5um) from liquid, and removing all the Solids from Liquid, with Polymer Dosing System.

Welcome to contact us if you need more information.

GN Solids Control CO. 

Kevin Liu

What is Hydro Excavation?

Hydro Excavation is now popular in North America for excavating soil by High Pressurized Water. Then an air conveyance or vacuum is used to transfer the mixture of water, soil, large size trash and some other materials into a debris tank. This Hydro Excavation allows for a non-destructive to excavate soil and locate underground utilities.

How to deal with the Hydro Excavation Waste Slurry Treatment?

GN Solids Control provides One Stop, Turn Key Solution to recover water and discharge the soil suitable for environment. The process diagram is as below.

1. Waste Collecting and Washing Module – the waste slurry is delivered to site via the hydro truck and then discharged to a large size collecting hopper at which bottom there are valves to discharge the slurry onto a coarse screen for large size trash separation.

The liquid with fine particles is collected in the tank located under the coarse screen. The liquid is then pumped to GN high G force drying shaker for finer solids separation. Here the operator can also use pressure flushing device to wash the slurry. GN shaker is fixed with composite frame shaker screen for longer working time and better performance.

2. Fine Solids Hydro cycling Separation Module – GN desilter with hydro cyclone manifold is fixed on a washing tank for further separation of the fine solids. The under shaker of the desilter is same model with GN drying shaker for easy maintenance. The hydro cyclone is using centrifugal force and gravity to separate the liquid and solids. The slurry is pumped into the cyclone with high speed for effectively separation process.

3. Dewatering Centrifuge Module – in this hydro excavation waste slurry treatment system, a decanter centrifuge (bowl diameter is 9 inch, 220mm) is used to remove the ultra-fine solids in the slurry. A chemical dosing system can be connected to the dewatering centrifuge to increase the efficiency of the separation.

Welcome to contact us for more detailed information.

 

GN Solids Control 

Kevin Liu

kevin@gnseparation.com

Shale Shaker Screens are widely used for Shale Shakers and Mud Cleaners.

Generally the screens shall be changed every 300~400 working hours, but that depends on the detailed project information. It is a Big Cost for the drilling companies/contractors or Solids Control Companies to purchase Shale Shaker Screens, especially when they buy the Original Screens from those reputable famous brands.

GN Solids Control understands the cost-effective shale shaker screens are very important for the solids control equipment.

So GN keeps researching and developing the best technology for manufacturing the Top Quality shaker screens for our clients. Now one of the major business of GN Solids Control is Shale Shaker Screen, and GN is able to manufacture around 8000 PCs of shaker screens every month. With our distribution network and cost-effective products, GN Shale Shaker Screens are popular around the world.

GN Screen Type
Hook strip flat screen
Steel frame screen
Composite frame screen
Pyramid screen
Hook strip soft screen
And more…

GN Replacement Screen
Original Screen for GN Solids Control shaker
Replacement screen for Derrick Shaker
Replacement Shaker Screen for MI-Swaco Shaker
Replacement Screen for NOV Brandt Shaker
And more……

What API Size Shaker Screen available from GN

D 100 Separation(Micron) API Screen Number
>1850.0 TO 2180.0 API 10
>780.0 TO 925.0 API 20
> 462.5 TO 550.0 API 35
> 390.0 TO 462.5 API 40
> 275.0 TO 327.5 API 50
> 231.0 TO 275.0 API 60
> 196.0 TO 231.0 API 70
> 165.0 TO 196.0 API 80
> 137.5 TO 165.0 API 100
> 116.5 TO 137.5 API 120
> 98.0 TO 116.5 API 140
> 82.5 TO 98.0 API 170
> 69.0 TO 82.5 API 200
> 58.0 TO 69.0 API 230
> 49.0 TO 58.0 API 270
> 41.5 TO 49.0 API 325

Hereby GN would like to emphasis that we have big stocking in the North American and China Mainland, the clients can receive the screens from us within two months, wherever they are.

Welcome to contact us if you need sample, test report or RFQ.