GN Solid vacuum pump

GN solid vacuum pump is 100% air driving pump, it widely used in solid, mud, sludge, liquid transfer.

GN sludge vacuum pump is a compact, robust and efficient pump which is capable of loading material via 25” hg of vacuum and dilivering the over 500 Meter. GN solid vacuum pump single units is available in 10M3/h, 20M/h and 40M3/h.

The model of GNSP-10B max hydraulic handling capacity is 10M3, the max solid size is 50mm, the request of air is 4.3M3/min(150CFM)

The model of GNSP-20B Max hydraulic handling capacity is 20M3, the max solid size is 50mm, the required of air is 8M3/min(280CFM)

The model of GNSP-40B Max hydraulic handling capacity is 40M3, the max solid size is 75mm, the required of air is 17M3/min(600CFM)

when pump working, the suction and discharge process conduct alternatively. Our GNSP-40B model can workin in eighter automatic mode or manual mode, both GNSP-20B and GNSP-10B only have automatic mode.

 

For more information about solid vacuum pump and other separation equipment, please feel free to contact GN Separation at any time.

GN sludge vacuum pump

GN solid vacuum pump is fully pneumatic conveying equipment, It is a type of pneumatic pump that sucks the material with vacuum produced by air operation, and then converts to positive pressure for discharging. Most of the solids, sludge and liquid could be transferred by using this pump. With special structure design of no rotating parts in the cavity, it can be used at tough environmental with high working performance and less maintenance.

The Capable of producing powerful suction up to 85Kpa(25 inHg). Discharge head and distance is large, clear water theoretical discharge height of 80 meters, horizontal distance is around 500 meters.

Sludge vacuum pump can be used for transport or removal Liquid with high solid content, oil sludge with high viscosity, can also be used for cleaning Handle bulk solid materials, including sand, dust, etc.

Air operation, no need electric power, suitable for hazardous area application.

Transferred solids size Maximum 50mm or 75mm, sludge solids content up to 80%.

Get more details of GN sludge vacuum pump, please feel free to contact GN.

 

GN solid vacuum pump

GN solid vacuump pump is called sludge vacuum pump, It can do some dry and transfer job, it is 100% air driving, need to connet to a compressor for work.

GN solid vacuum pump is a compact, robust and efficient pump which is capable of loading material via 25” hg of vacuum and delivering the over 500 meter, there is 3 models GNSP-10B, GNSP-20B and GNSP-40B, GNSP-40B model can work in either automatic mode or manual mode, for GNSP-20B and GNSP-10B only have automatic mode.

Features of GN solid vacuum pump 

100% air driving, no need electric power, it is suit for hazardous area application.

Powerful self-suction with longer transfer distance, the Max suction distance up to 50M, and discharge distance up to 500-1000M

It is widely used for solids, sludge and liquid.

Transfer solid particle size max 50mm or 75mm, solid content up to 80%

Compact structure for easy to move

Automatically and continously working is available with easy operation and maintenance

Now contact GN Separation to obtain the quotation and technical solution of solids vacuum pump for free.

GN Solids Vacuum Pump Shipped to Mining Service Company

GN Company received orders from mining service company for GN Solids Vacuum Pump, which would be used to clean powder and water mixture during the process of ore mining. Before the job is done by manual, and now GN Solids Vacuum Pump solves the problem, and transfer the mixture automatically.

GN Solids Vacuum Pump can work on different kinds of material, including but not limited to sludge, slurry, powder, soil, sand, etc. Please find the pump video during work, from linkage as below.
https://www.youtube.com/watch?v=OuUWPKmtVr0

GN Vacuum Pump is 100% air driven vacuum pump, and there is no cost of electricity or diesel by itself. There are not rotating parts in the internal part of pump body, so it is much less maintenance and the pump can work in dangerous environment, which need the machine to be explosion proof. The pump shall be connected with Air Compressor, and GN Company focus on manufacturing and supplying Pump only, and suggest clients to find air compressor from local market. GN Engineers would send required air pressure and air amount for clients.

The vacuum is created by venture, and when air is supplied to the pump, it would create strong vacuum/negative pressure, and the sludge would be sucked into the pump body. The air is still there, and with the valves open and close, the sludge would be blow out. The pump works continuously in the circle of suction and discharge.

Welcome to contact GN Sales Managers, and they would offer One Stop Turnkey Solution for clients’ project.

 

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company Supplied Vacuum Pump for European Client

GN Company is a professional manufacturer of Solids Vacuum Pump, and the pump is 100% pneumatic driven pump, and there is no cost of electricity or diesel. The pump can work on sludge, solid, powder, slurry, and also oily sludge with high viscosity and density.

Now GN Company has developed 3 models of Vacuum Pump, with different capacities, including 10m3 per hour, 20m3 per hour, and 40m3 per hour. The pump can create 85Kpa vacuum, the maximum suction distance can reach 50meters, and maximum discharge distance can reach 500/1000meters. Maximum solid size can be transferred by the pump is 75mm.

The pump can be used to transfer waste mud in drilling site, clean waste pit, oily sludge in tank bottom, and animal waste, food waste, and hazardous waste recovery, etc.

Please find pump video from linkage as below.
https://www.youtube.com/watch?v=OuUWPKmtVr0

GN Company has already supplied pump to clients in UK, Norway, Portugal, Serbia, Greece, Russia, Mongolia, Malaysia, Singapore, India, UAE, Oman, Bahrain, Nigeria, Egypt, Canada, Peru, etc.

When clients come to GN Company, the GN Engineers would offer a professional question list, including where the sludge from, the solid content percentage, material temperature, capacity requirement, the suction depth and discharge height of pump, and if the sludge has corrosion characteristics. After clients answering these questions, GN Engineers can find out the best solution for clients’ project.

It is acceptable to arrange trial test with clients’ sample by the Vacuum Pump within GN factories.

Welcome to contact GN Sales Managers, and GN Company would offer one stop turnkey solution based on clients’ requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)