Three Phase Decanter Centrifuge

GN Company completed production of one set of 3-phase Decanter Centrifuge with VFD control panel, and shipped to Middle East client’s job site, and it would be used for oily wastewater treatment. GN Company is a professional manufacturer of Decanter Centrifuge and Disc Separator. And Decanter Centrifuge includes 2-phase Decanter Centrifuge and 3-phase Decanter Centrifuge. 3-phase Decanter Centrifuge can be widely used for solids, heavy phase, and light phase separation (solids-oil-water).

GN 3 phase decanter centrifuge adopts the design of installation of Main Motor and Back Motor at the same side of Decanter, and the connection between motor and Bowl/Screw is V belt. The two motors are installed horizontally, and that brings much more convenience for maintenance. Considering the abrasion from the solids content in the wastewater, GN Technical Team designs tungsten carbide plates, in order to protect the screw blades, which would greatly increase working hours of Decanter, and reduce maintenance cost. The solids discharge port is also protected by wear-resistance bushing.

The components in the GN Electrical Control Cabinet are all from international reputable brand, including VFD, PLC, Touch Screen, and the other small components. And if it is necessary, GN Company can also supply explosion proof standard motor and control cabinet. Both ATEX and IEC are available.
Besides supplying single unit of equipment, GN Company is also capable to supply Sludge Feeding Pump, Polymer Preparation Unit, Screw Conveyor, etc.

Welcome to contact GN Sales Managers, and they would offer detailed solution based on clients’ project requirement.

Best & Regards,

Kevin Liu
Regional Manager
GN Separation & Conveying
Hebei GN Separation & Conveying Equipment Co., Ltd

Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com
GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company supplied one unit of Three Phase Decanter Centrifuge for European client, which is used for recovering clean oil from oily sludge in the refinery plant.

GN Company is professional manufacturer of Decanter Centrifuge for about 13 years, including 2 phase and 3 phase Decanter Centrifuges.

The Sludge Inlet, Polymer Inlet, and Flushing Inlet are the same inlet for Three Phase Decanter Centrifuge, and can be connected by Tee/Four-way fitting, and clients can find easily in local Hardware Store. (3 bar is enough for feed inlet of Decanter)

GN Company would supply detailed and complete PI&D Drawing, User Manual, and complete set of spare parts for clients.

GN Company applies the technology of Centripetal Pump for discharge of the heavy liquid. It is used for flexible of different Liquid Phase Proportion. An adjustable impeller discharges the “heavy” liquid phase. Furthermore, the operator can use the adjustable impeller to adjust the pond depth of the heavy liquid without difficulty during ongoing operation. According to the Proportion of two different phases, an adjustment mechanism causes the position of the impeller to change, thus changing the separation line of the liquids. The process engineering results can thus be influenced so as to achieve the required separation result.

GN Company’s Decanter is made of Duplex Stainless Steel 2205/2304, and its working hours are much longger than SS304/316, especially when the slurry has high content of chloride ion.

Besides supplying Centrifuge, GN Company is also capable to supply supporting equipment, which includes Sludge Feeding Pump, Screw Conveyor, Polymer Preparation Unit, Tank, etc.
Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel: +86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)