GN disc stack separator

3-phase disc stack separator is an efficient solid-liquid separation equipment, widely used in chemical, petroleum, pharmaceutical, environmental protection and other fields. This separator adopts a unique disc design, through the high-speed rotation of the disc to generate a strong centrifugal force, the solid particles in the mixture of liquid and liquid separation.

The main working principle of the three-phase disc separator is: when the mixed liquid enters the separator, under the action of the high-speed rotating disc, the solid particles are thrown to the outer edge of the disc by centrifugal force and slid down along the disc under the action of gravity to the slag discharge; while the liquid, due to the difference in density and centrifugal force, forms a number of concentric rings inside the disc and is discharged from the central part of the liquid discharge port.

Three-phase disc separator has the following advantages:

High separation efficiency: due to the design of high-speed rotating discs, it can generate strong centrifugal force, thus achieving efficient solid-liquid separation.
Wide range of application: It is suitable for processing mixed liquids of various concentrations, viscosities and particle sizes, and is especially suitable for processing mixed liquids containing fine solid particles.
Easy to operate: compact structure, small footprint, easy to operate, easy to maintain and manage.
Energy-saving and environmental protection: there is no need to add any chemicals in the separation process, which reduces the operation cost and pollution to the environment.
It should be noted that when using the three-phase disc separator, you should choose the right model and specification according to the actual production demand, and operate and maintain it according to the operating procedures to ensure the normal operation and separation effect of the equipment.

Pls feel free to contac GN if any further question regarding 3-Phase disc stack separator.

Decanter Centrifuge Manufacturer in China

Compared with other separation machines, centrifuges can not only obtain solid phase with low moisture content and high-purity liquid phase, but also have the advantages of small size, good sealing, continuous operation, automatic remote control, etc., so they are widely used in chemical industry, Petrochemical, petroleum refining, light industry, medicine, food, textile, metallurgy, coal, mineral processing, shipbuilding, environmental protection, military and other departments, such as the recovery of pulverized coal for wet coal mining; the purification and reuse of drilling mud for oil mining; uranium Concentration of isotopes; sludge concentration and dehydration of sewage treatment; refining of petrochemical products; extraction of antibiotics and pesticides; manufacture of milk, yeast, beer, fruit juice, sugar, orange oil, animal and vegetable oil, rice bran oil, starch and other foods; The dehydration of fabric fibers; the purification of lubricating oil and fuel oil need to use centrifuges. It can be seen that the centrifuge has become widely used separation equipment in various sectors of the national economy.

The application functions of the centrifuge mainly include: dehydration, clarification, concentration, classification, separation and so on. Different centrifuge models must be selected according to different material characteristics and separation requirements, which leads to the problem of centrifuge selection. In the actual production process, due to the selection of suitable separation equipment for some projects, the process is simple, the energy consumption is reduced, the product quality is improved, and good economic benefits are obtained; but there is also improper selection of centrifuges, which makes the production process unable to proceed normally. , resulting in greater economic losses. Therefore, in the engineering design and technical transformation, the problem of how to correctly select the centrifuge has been recognized and valued by the majority of engineering and technical personnel.

Welcome to contact GN Sales Manager.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company’s Disc Stack Separator Received Great Attention among European Clients

GN Company is a professional manufacturer of Centrifuge machine, including 2/3 Phase Decanter Centrifuge and 2/3 Phase Disc Stack Separator. Recently clients from Europe show great interest about GN Company’s Disc Stack Separator, for Olive Light phase processing.

Disc Stack Separator is high speed centrifuge machine, used for Solid/Liquid, Solid/Liquid/Liquid separation. It is high speed, stable, sealed, efficient, and automatic slag discharge equipment. The separation takes place inside the bowl during high speed rotating. The light phase is feed into the rotating centrifuge bowl from the top of Separator through a stationary inlet pipe, and it accelerated in the distributor, which is specially designed to ensure smooth acceleration of the feed liquid. When the light phase leaves the distributor, it would enter into the disc stack. The separation of oil-water-solids takes place between the discs, with the light phase moving through the disc stack to the center and then it is discharged into the upper collecting frame. The heavy phase and heavy solids separated from the light phase would move out to the periphery, and the heavy phase is led through channels in the top disc to the lower collecting frame. The solid is collected in the periphery, from where it is discharged intermittently into the solids collecting cover below the bowl of separator. The solids discharge is achieved by a hydraulic system, where suitable intervals forces the sliding bowl bottom to drop down and thus opening the solids discharge ports at the bowl periphery.

Welcome to contact GN Sales Managers, and they would offer detailed One Stop Turnkey Solution based on clients’ requirement.

 

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob(WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Company 3 Phase Decanter Centrifuge and Disc Separator for Client in Fish Oil Production

GN Company has completed production of one set of Three Phase Decanter Centrifuge and Three Phase Disc Stack Separator, and plan to ship by next week to client’s factory for fish oil production. Both Decanter and Separator are used for Solids/Liquid/Liquid separation, and Three Phase Decanter Centrifuge is used in the first stage for separation Oil, Water, and the majority of Solids, and the Oil would be feed into the Three Phase Disc Separator for purifying, which is to remove fine solids and water, also named oil polishing.

2018.08.14-Large-Decanter-Centrifuge
Here are specifications about Main Motor and Back up Motor of GN Company Three-Phase Decanter Centrifuge, they are Reputable Chinese Brand, VFD (speed can be adjustable by Electrical Control Panel), with protection level IP54, F, and Overload and Overheat protection. Explosion Proof for Motor and Control Panel are optional. And GN Company can supply explosion proof equipment based on Chinese Explosion proof standard, and also ATEX, CNEX.
Disc Separator has much more quickly RPM, and therefore bigger centrifugal force than Decanter Centrifuge. So Disc Separator can separate out fine solids and water from Oil. Both its discharge time and discharge frequency can be adjustable based on clients’ requirement. And there are two types of discharge types, including automatic and manually, so clients can also choose based on their requirement.
Some clients choose Two Phase Decanter Centrifuge and Three Phase Disc Stack Separator, which can save some cost.
Welcome to contact GN Sales Managers, and they would offer detailed solution based on your project.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob(WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)

GN Disc Stack Separator for Yeast Removing after Fermentation in African Client’s Beverage Plant

GN Company has completed production of one set of 2-Phase Disc Stack Separator, which is used for purifying fermented wash and reducing yeast content after fermentation. The Treatment Capacity of the African client ordered model is about 5m3/hour, with VFD control panel. The fluid wetted part is made of high-strength food grade stainless steel. The control cabinet is not explosion-proof, and it shall be placed in separate room. GN Technical Team would supply One Explosion-proof Button Box on site.

GN Separator is capable to separate extreme tiny solid particles from liquid phase, and the solid particle is less than 1um, which is dispersed in suspensions.

Here is brief introduction about working principle of Disc Stack Separator.

The fluid is feeding into the bowl through a feed pipe. In the distribution cabinet of the disc separator, the fluid is smoothly accelerated until it is synchronized with the speed of rotary bowl. The disc stack separator in the rotating cylinder divides the fluid into many thin layers, forming a large area of clarification area. The high-speed centrifugal force makes the solids slag separated from the liquid in the disc stack deposit.

GN Company offers Product Quality Warranty 14 months after shipment or 12 months from commissioning date. (Whichever comes first)

GN Company offers reliable & promptly after sale service and we can send Engineers to for installation & commissioning service based on clients’ requirement.

Welcome to contact GN Sales Managers for detailed technical specifications.

It’s acceptable to post sample to GN Company for arrange Trial Test, and check actual performance.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob(WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)