GN Company Supplied Decanter Centrifuge for European Client

GN Company has been a professional manufacturer of Decanter Centrifuge for about 10 years, with capabilities to manufacturer Decanter with bowl diameter from 220mm~760mm, and treatment capacity from 1 m3 per hour to 120 m3 per hour.

Besides 2-phase Decanter Centrifuge, GN Company is also capable to manufacture 3-phase Decanter Centrifuge, which is used for solid-liquid-liquid separation. 3-phase Decanter Centrifuge has two rotors, including drum and screw. When the drum and screw rotate at high speed, there would create centrifugal force, which is many times bigger than gravity. So the particles would be separated from the liquid, and settle on the inner wall of the drum. Because the screw rotates at slower speed than drum, therefore the solids would be pushed out from the slag outlet. The liquid would form two separate layers, because of the difference of density. The heavy phase layer would drawn against the wall of drum by the centripetal pump, and would be discharged from heavy-phase outlet. The light phase layer is close to the spiral end, and discharged by overflow. The whole process is continuous and highly automatic.

The material touch part of GN 3-phase Decanter Centrifuge is made of high grade duplex stainless steel, which is much better than SS 316 in strength and corrosion resistance. The Solids Discharge Port is protected by Tungsten Carbide Insert. The bearings are from international reputable brand, and clients can find spare parts easily from local market.

Welcome to contact GN Sales Managers, and they would offer one stop turnkey solution based on clients’ requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9
Mob (WhatsApp/Wechat): +86-15810901775
Email: Kevin@gnseparation.com

GN China: www.gnseparation.com (Langfang/Beijing)
GN USA: www.gnsolidsamerica.com (Houston, Texas)
GN Russia: www.gnseparation.ru (Moscow City)