gnadmin | GN Decanter Centrifuge

GN Company Supplied Polymer Dosing System for African Client

GN Company delivered one set of Polymer Dosing System for client from Africa, which is used to help Centrifuge to get better performance during dewatering. Because during sludge dewatering process, the ultrafine solids (less than 2um) cannot be separated by Centrifuge directly.

The Polymer Dosing System is help to gather the fine solids together, and form flocculent, which is easier to be by separated by Decanter.

Please find video about from linkage as follow,
https://www.gnseparation.com/video/gn-tbm-mud-dewatering-decanter-centrifuge-video

Besides automatic PAM Polymer Dosing Unit, GN Company can also supply single barrel type chemical solution preparation unit.

GN Company is a professional manufacturer of Separation & Conveying System for 13 years, including Decanter Centrifuge, Disc Separator, Oil Water Separator, Polymer Dosing System, Screw Conveyor, Sludge Solids Transfer Pump, etc.

Here are two Advantages about GN Company as follow,

1. Besides supplying single unit of Equipment,
GN Company takes more advantages of delivering customized One Stop Turnkey Solution for your project, including Design & Manufacturing.
Our Main Equipment is Centrifuge, and we also manufacture related accessories, including Shaker, Pump, Screw Conveyor, Chemical Dosing Unit, Slurry Tank, etc.
2. GN Company can design & manufacture the whole system in Containerization or Skid, it is safety, and easier for transportation by truck, and movable around different job sites.

Welcome to contact GN Company Sales Managers, and they would send professional solution for your project.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob (WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Constant Torque self-adaptation Function for Decanter Centrifuge

GN Company is a professional manufacturer of Decanter Centrifuge, with capability of manufacturing Centrifuge with bowl diameter of 220mm~760mm, capacity of from 1~2m3/hour to 120m3/hour. GN Technical Team is a very professional team, with experience of R&D for more than 10 years.

Here are introduction about Constant Torque self-adaptation Function for GN Decanter Centrifuge.

When concentration changes, the current of back motor (for driving screw) would fluctuate accordingly.

1. When the monitored current value of back motor exceeds set value, the differential speed of centrifuge is too low, the control-programming program automatically controls the back motor working current to decrease to the preset value, and increases the differential speed of centrifuge.

2. When the monitored current value of back motor returns to normal setting value range, the control-programming program automatically controls the auxiliary motor working current to return to the preset value, and the differential speed of centrifuge returns to the normal.

3. When the monitored current value of back motor is low to the set value, the differential speed of centrifuge is too high, the control-programming program automatically controls working current of back motor to rise to the preset value, and reduces the differential speed of centrifuge.

4. Constant Torque self-adaptation Function can ensure the uniform of dry humidity of sludge (discharged from Centrifuge), and avoid the plugging problem caused by concentration change of feeding sludge, which provides reliable guarantee for the normal and stable operation of centrifuge.

Welcome to contact GN Sales Manager for more specifications.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob(WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Report about Comparison of Centrifuge and Filter Press

Regarding to the Clients’ questions about the Comparison of Decanter Centrifuge and Filter Press, GN Company Technical Team had research and prepared report, details as follow.

1. Discharged Cake Moisture
1.1 Decanter Centrifuge
Decanter centrifuge is using centrifugal force to separate solid and liquid under normal pressure, thus the discharged solid cake with relative high moisture, about 50~80%.
1.2 Filter Press
Filter press is dewatering the sludge by high pressure extrusion and filtering, discharged solid cake would be dryer than same out of decanter centrifuge, about 45~75%.

2. Applicability
2.1 Decanter Centrifuge
Decanter centrifuge can be widely used for sludge with low viscosity sludge, and high viscosity such as the oily sludge.
2.2 Filter Press
Filter press normally will not be used for oily sludge dewatering due to the filter membrane blocking issue.

Clients shall consider factory situation, labor cost, working condition, sludge type, plant area, investment and so on to decide to use filter press or decanter centrifuge.

GN Company is a professional manufacturer of Decanter Centrifuge for 13 years, with bowl diameter of 220~760mm, and capacity of 1 ~120 m3/hour.

Welcome to contact GN Sales Managers, they would send the best solution based on your project requirement.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd
Tel:+86-316-5276988/9 Fax:+86-315-5276990
Mob(WhatsApp/Wechat): +86-15810901775
Email: kevin@gnseparation.com
Web: http://www.gnseparation.com
Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)

GN Company Supplied Solids Transferring Pump for Middle East Client

Client from Middle East ordered one unit of Solids Transferring Pump for suction grit (dry sand), which is used for blasting.

GN Solids Vacuum Pump can be widely used for transfer Sludge, Solid (such as carbon, soil, powder, etc.), Slurry, etc.

Please find video about the Pump during work from Linkage as follow.

https://www.youtube.com/watch?v=OuUWPKmtVr0

One of the Biggest Advantages is that the Pump is 100% air driven/operation, while there is no cost of electricity or diesel. So the Pump can work in dangerous environment, such as Petroleum Site, Refinery Plant, without worrying about explosion.

GN Company has developed 3 models of this Pump, with 3 different capacities, including 10, 20, 40m3/hour (Note, the Capacity is calculated based on clean water, it might reduce some during actual operation).

The Air Requirement for each model is different, hereby taking 20m3/hour model as an example, its Pressure Requirement is 550~690Kpa (80~100PSI), and Air Demand is 80m3/minute (280CFM).

Our Company already supplied this Pump to UK, Norway, Russia, Portugal, Greece, Kazakhstan, India, Nigeria, Mongolia, Malaysia, etc.

It’s acceptable to arrange trial test with clients’ sample with GN Pump, for making sure that the Pump can work for your project.

Welcome to contact GN Sales Managers for detailed specifications.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying

GN Company Offers One Stop Turnkey Solution for European Oil Sludge Treatment Project

Recently Clients from Europe consulted with GN Sales Managers for solution about Oil Sludge Treatment, mainly is for petroleum oil sludge. The Clients would like to recover clean oil from sludge, while discharge solids and water suitable for environment.

GN Company has developed Oil Sludge Treatment System, which can be widely used for Crude Oil Tank Sludge, Refinery Plant Waste Oil Sludge, and Drilling Waste Oil Sludge, etc.

The System is to add chemical (flocculants & emulsifier) into sludge, while heating the sludge to 60~70 C degree, then pumped the sludge into GN System for 3 Phase Separation (Oil Water Solids). The recycled water can be reused in the washing system, the oil can be sold to Refinery Company, and the solids, with oil content less than 2%, can be sent for biodegradation or thermal unit for final disposal.

Please find video about the System during operation from linkage as follow.
https://www.youtube.com/watch?v=hXrzm5J_k1A

There are two Big Advantages about GN Company as follow,

1. Besides supplying single unit of Centrifuge/Separator, GN Company takes more advantages of delivering customized One Stop Turnkey Solution for your project, including Design & Manufacturing. GN Company can also manufacture the related accessories, including Pump, Screw Conveyor, Chemical Dosing Unit, Slurry Tank, etc.

2. GN Company manages to design & manufacture the whole system on Skid or Containerization, which is easier for transportation by truck, and movable around different job sites.

Best & Regards,

Kevin Liu

Regional Manager
GN Separation & Conveying