gnadmin | GN Decanter Centrifuge

GN decanter centrifuge

This month, GN will attend the ECWATECH 2023 Exhibition held in Moscow.

GN will be provided a platform for all the water treatment supplier to communication. Welcome to GN booth to get more information.

This time, GN will show the equipment as below

Decanter centrifuge– GNLW series decanter centrifuge has the bowl diameter from 9 inch to 30 inch for different flow rate requirements. GN decanter is widely used in waste water treatment and other industries separation application.

2. Solid vacuum pump, it is 100% pneumatic driving and make it suitable for the harzard and explosive environment. The max particle size is 50MM, The pump is designed for both automatic operation and manually operation. Operator only needs to adjust the suction and discharge time by twisting the switch on the panel.

For more information on the mining tailing dewatering centrifuge, please feel free to contact GN Separation.

sludge vacuum pump

GN solid control is a professional supplier of various oilfield equipment, including oil drilling and service equipment, oil production equipment, OCTG, wellhead & downhole tools and spare parts. Our products have already been exported to USA, South America, Africa, Middle East, Russia and some other countries (regions).

Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%.

We have 3 models GNSP-40B, GNSP-20B and GNSP-10B, The maximum transport capacity of the three models for clean water is 10 cubic meters, 20 cubic meters and 40 cubic meters respectively. According to different material conditions, suction and discharge height and distance, the conveying capacity will be different. Generally, the lower the material density, the lower the viscosity and the shorter the conveying distance, the higher the working efficiency of the equipment will be.

Now contact GN Separation to obtain the quotation and technical solution of solids vacuum pump for free. Spot sales can meet the requirements of fast delivery.

Waste Oil Decanter Centrifuge

GN 3 phase decanter centrifuge named oil Decanter centrifuge, it is mainly designed for Solid-liquid-liquid three-phase separation of materials. With our over 16 years of experience in the separation industry, it is the most advanced type equipment for 3 phase separation.

The smallest model of decanter centrifuge is 224FT, it come with 2 motors, one 11KW Main Motor and one 5.5KW back drive motors, the bowl diameter of 224 models is 220mm, the bowl length is 924mm, Bowl L/D Ration is 4.2, Max G Force is 3080G, The typical bowl speed is 4800PRM, and the typical G force is 2838G.

Three-phase Oil Decanter Centrifuge show great superiority in the treatment of triple mud, as they not only separate out the solids in the mud, but also the dirty oil in the mud, which is incomparable to other separation methods. At the same time, the water and oil content of the dry sludge after treatment by the three-phase decanter centrifuge is reduced to varying degrees.

In the three-phase Oil Decanter Centrifuge, the main motor drives the drum to rotate at full speed and the material is continuously introduced into the spiral by the feed tube and evenly distributed to the spiral discharge port.

For more information on the mining tailing dewatering centrifuge, please feel free to contact GN Separation.

GN sludge vacuum pump

GN sludge vacuum pump named solids vacuum pump, it can do some dry and transfer job, it’s 100% air driving, need to connect to a air compressor for work.

There are 3 model due to the handling capacity, GNSP-10B, GNSP-20B and GNSP-40B, the max handling capacity is respective 10M3/h, 20M3/H and 40M3/h. The request of vacuum degree of all of them is 85Kpa/25 inch HG(Mercury Column), and the max sunction distance is 50M. The max solid size is 75mm for GNSP-40B, and max particle size is 50MM for both of GNSP-10B and GNSP-20B. There are some discrepancy regarding to air demand, 17M3/min(600CFM) for GNSP-40B, 8M3/min(280CFM) for GNSP-20B, 4.3M3/min(150CFM) for GNSP-10B.

The vacuum pump equip with the quick connector at inlet/outlet pipe, which is equipped with barb to connect with suction and discharge hose.

GN vacuum pump is 100% pneumatic pump with no electric component, it can used in the explosive environments and also pass ATEX certification. A typical application of vacuum pump is to transfer the oil sludge to the oil sludge system as a conveying equipment.

To help customer in model selection on solids vacuum pump, please feel freely to contact GN separation.

8 Sets Inclined Plate Clarifier and 6 Sets Decanter Centrifuge for mud treatment6 Sets Decanter Centrifuge for mud treatment

Recently GN separation completed 8 sets inclined plate clarifier and 6 sets decanter centrifuge, 8 sets inclined plate clarifier will be sent to overseas customers for industrical sludge treatment, 6 sets decanter centrifuge will be sent to the domestic major drilling company for driiling mud treatment.

In this order, the overseas customer choose the model of GNIPC-25A for inclined plate clarifier, GN IPC design incorporates inclined plate settling surfaces pitched at a 55° angle from the horizontal with uniform plate spacing. Due to plate angle the solids slide down the plates into the sludge hopper below the plate pack. Herewith pls find the following photo

Chemical like polymer pretreatment often improve solids removal effeciencies. The use of chemical flocculants with GNPIC inclined plate clarifier is depend on the efficiency of the system and so on.

In regards to these 6 sets decanter, customer choose the model of GNLW453-VFD with the bowl diameter 450mm and bowl length 1540mm, it equip with 2 motors(Main motor is 55KW and back drive motor 22KW) and VFD control cabinet.

For more information on the mining tailing dewatering centrifuge, please feel free to contact GN Separation.