There is one Complete Solids Control System for Drilling Rig is under final assembling in GN’s work plant, and would be shipped to client’s work site soon.

The system includes 4 modules as below,

  1. Two Units of Shale Shaker (removing solids with size more than 100um)
  2. One Unit of De-sander (removing solids with size more than 45~70um)
  3. One Unit of De-silter (removing solids with size more than 20~45um)
  4. One Unit of Decanter Centrifuge (removing solids with size less than 20um)

2019.09.18 Mud Circulation System

Drilling Fluid Solids Control System Working Procedure as below,

The drilling mud firstly pumped to the Mud Gas Separator, if the drilling fluid has Toxic flammable gas, for removing the toxic gas.

Secondly, The drilling mud would be pumped to shale shaker, for removing coarse particle, with size more than 100um.

The liquid and fine solids would pass the shaker screen, and flow into storage tank under the shale shaker.

Thirdly, the drilling fluid would be pumped to Vacuum Degasser, for removing air from drilling fluid, in order to increase separation efficency for equipment after.

Then the drilling fluid would be pumped to Sand Removal Cyclone, for removing solids 45~70um, then Desilting Cyclone, for removing solids 20~45um.

The drilling fluid is clean after treated by Mud Cleaner, and if the project is necessary to remove fine solids, less than 20um, the drilling fluid can be pumped to Decanter Centrifuge for further solid separation.

2019.09.18 Drilling Mud System 

Welcome to contact GN Company for more technical specifications & working videos about our equipment in working sites.

ABOUT THE AUTHOR

gnadmin