Solids control equipment for 1000hp land drilling rig

GN Solids Control, as China top solids control manufacturer, exported 4 complete sets solids control equipment for 1000hp land drilling rigs to an North America drilling company. The drilling company also includes some replacement equipment for their previous land rig mud systems.

The order includes below solids control equipment:

1) Linear motion shale shaker model GNZS594E-HB, quantity 10 each

2) Vacuum degasser, GNZCQ270A, Quantity 4 ea

3) Desander mud cleaner,, quantity 5 ea

4) Desilter mud cleaner: quantity 7 ea

5) Different models centrifugal pumps, quantity 25 ea

6) Mud agitator,, quantity over 40 ea

7) Otherreplacement spare parts.

There are so many companies in China and out of China, why the customer finally choose GN after comparison?

1) GN Solids Control is the 1rst API certified solids control company in China. Now GN have CE certificate approved by DNV for European market.

2) GN is the first China solids control manufacturer who registered in Houston America and have a separate brand GN Solids America. All GN equipment made per international high standard.

3) GN company mission: Top brand and reasonable price. No lower, no higher.

4) As the fast developing company, GN think highly of customers’ feedback and keep improving quality and design.

5) GN centrifugal pumpinterchangeable with NOV mission pump. It makes customers easy for replacement and for stock spare parts.

6) GN have shaker model interchangeable with Swaco Mongoose and Derrick.

Besides mud solids control equipment, GN also make drilling cuttings treatment equipment. GN offer one-stop solution for drilling rigs.

Below is the main drilling waste managementequipment GN makes:

1) Drilling cuttings screw conveyer

2) Vertical cuttings dryer for both oil base mud and water base mud. The performance approved by jobsite test. While other brand, they can only be used for oil base mud.

3) High G drying shaker for water base mud

4) Dewatering unit for waste water treatment or water base mud treatment.

GN Delivered Three Pieces Sample Shaker Screen to an Indian Customer

It has been an acknowledged truth that China is a manufacture world of China. If you know this, I want to tell you another generally accepted truth that Anping county is the manufacture world of screens. Hebei GN Solids Control Co., Ltd is a top manufacture of drilling waste management and equipment which certainly include the first stage treatment equipment shale shaker. For a shale shaker, its treating effect large depends on screens installed on it. The quality of screens will decides to some degree of the shale shaker’s performance. GN Solids Control owns a shaker screen manufacturing factory in Asian largest wire mesh center city. GN Solids Control company has adopted most advanced technology to manufacture all kinds of shaker screens and can supply many a kinds of replaceable shaker screens for many brand shale shakers.

Last Tuesday, GN has delivered three pieces sample shaker screens to an Indian customer. This customer has showed great interest in GN shake screens. This time, GN carefully and seriously manufactured three pieces sample screens for this customer. Once this customer is satisfied with the sample, the will lay a big order for shale shaker screens.

One important criterion is screen mesh. Thread is woven into cloth, similarly, metal wire can also be woven to create a metal cloth. Mesh means the number of holes in one inch’s length. And, the larger the number is, the smaller solids can be removed out. For many years, screen mesh has evolve in competitive screen manufacturing, contributing to the usage of thin but strong cloth to improve screen’s service life and conductance.

Specialized in manufacturing solids control equipment and shaker screen, Hebei GN Solids Control Co., Ltd is a perfect choice for you.

Oil-base fluid course of treatment allows reuse of costly liquids

The GN-USE process is really a patent-pending technology that enables operators to reuse invert emulsion drilling liquids over multiple wells without depending on reclamation through high rates of dilution. The procedure goodies oil-base drilling fluid, reducing solids below 1% while drilling.

Before the development of the GN-USE technology, combating the build-from ultra-fine, low-gravity solids needed using dual Decanter Centrifuge and dilution. Using the GN-USE process, staged centrifugation supported by chemically enhanced treatment renders both LGS and drill solids workable. The machine may be easily modified to create relatively ‘dry’ clippings, reducing drilling wastes.

Combined mechanical/chemical process removes low gravity solids

Conventional mechanical separation techniques are not able to extract ultra-fine low-gravity solids from an oil-base drilling fluid, needing operators to dump the costly fluid. The chemically enhanced GN-USE process continues to be area-proven returns the fluid towards the loop in the same weight because the dirt was initially built. Following the dirt operates within the drying out shakers, a minimal-speed centrifuge constitutes a separation then returns the barite slurry using the large LGS contaminants to the dirt system. This slurry is modified to complement the initial dirt weight.

The liquid phase in the low-speed Solids Control operates for an effluent tank where it’s polished utilizing a mid-speed centrifuge. Base fluid is added before the target volume is met. Then your fluid is undergone our prime-speed centrifuge and also the GN-USE chemicals are put into further take away the LGS. By delivering clean fluid, GN-USE technology also significantly enhances drilling performance.

Reduced waste equals reduced well cost

The GN-USE process provides tremendous savings in dirt-related costs, including reducing the quantity of solids-laden liquids moved for disposal. By reduction of the quantity of LGS within the fluid, the GN-USE process also reduces the quantity of dilution needed to come back the drilling fluid to some functional condition. This protects on assets, for example barite, base liquids and chemicals connected with building invert emulsion drilling liquids. Top quality barite is progressively scarce and costly. The GN-USE process allows operators to lessen the amount of barite along with other materials within their fluid systems, supplying 25-30% savings.

Simple process using easily available equipment

While using easily available Compact disc-500 centrifuge, the GN-USE process constitutes a separation from the fluid in the LGS using low speed centrifugal separation. The slurry will be balanced to complement the load from the dirt system. When the slurry is incorporated in the effluent tank, it’s pumped towards the high-speed centrifuge, that is typically set around 2,400 revolutions per minute. Base fluid might be added at this time to assist lower the plastic viscosity. Another pass within the centrifuge, this time around at 2,900 revolutions per minute, robotically cleans the effluent just before caffeine stage.

A single tote chemical that consists of dual surfactants along with a polymer inside a water-based company is added. When the clippings are water-wet, they create a charge. The polymer covers them and results in the ultrafine solids to develop to some size that’s readily detachable with a final go through our prime speed centrifuge at 2,900 revolutions per minute, producing a fluid that may be came back towards the primary drilling fluid system free from low gravity solids. Explore to the GN, you will notice the original world there are so fine workmanship suppliers.