Shale shaker is a type of very common
drilling mud solids control in all kinds of drilling projects. As a leading
manufacturer of solids control equipment
, GN could provide the shale
shaker and other mud recycling equipment for oil gas
drilling, horizontal directional drilling, water well drilling, tunneling and
piling projects.

The capacities of GN’s shale shaker are
200GPM, 500GPM and 600GPM under the mud condition of density 1.2g per cubic
centimeter, viscosity 45s measured by Marsh funnel viscosimeter and screen of
API 40.

GN Solids Control has a 4-panel screens
shale shaker which is the largest model in GN’s shale shaker product line. This
model could be used at the oil rig site for primary solids control. At the
consideration of easy operation and maintenance as well as the widely accepted
treating capacity, GN made the model of GNZS594E-HB shale shaker to fully
meet the market request.

So, what are the advantages of this model?
Or we say what the features are?

1. Simple structure design of the shaker
deck, the operator could observe the work performance easily. The added extra
horizontal square steel strips at both sides of the deck make the deck much stronger.  

2. The 2 vibrators located vertically with
the beam makes there is a longer connecting face which could distribute the G
force uniformly to the whole shaker deck.

3. Hidden design of the lead screw beneath
the shaker deck makes it available to adjust the shaker deck angle while the
shaker is running. The operator only need a ratchet wrench to adjust the deck
angle from one side of the lead screw, the other side would be adjusted at the
same time.

4. To ensure the better sealing
performance, the screen frame was installed a type embedded rubber sealing.
This rubber sealing will not be taken off with the exception of manually
disassembling.

5. Wedge blocks are used to fasten the
screen panels is also a popular method. This makes the exchanging of the screen
easier.

6. Sometimes the shale shaker could be used
as a under shaker of the mud cleaner unit. All GN’s shale shaker will have the
pre cut installation holes to install the cyclone frame. Which means GN’s
cyclone frame for mud cleaner is removable. All cyclone frame, no matter what
capacity, the installation location would be the same.

7. By changing hopper feeder, GN’s 4-panel
shale shaker could be used as a drying shaker for waste cutting management. The
G force is up to 8.

No hesitate to contact GN Solids Control
for a quote of GNZS594, especially the client from the America, as this model
is on a promotion status.


ABOUT THE AUTHOR

gnadmin