Category: dewatering centrifuge

DAF Sludge Dewatering and Soild Separation

An South American Waste Treatment Service company sent information to us, GN Solids Control,  and looked for the exact solution for the DAF Sludge Treatment.

DAF, the full name is Dissolved air flotation, which can be widely used in sewage treatment, in the fields of industrial, manufacturing, oil & gas drilling, and marine waste water treatment.

DAF systems inject micro bubbles into the waste steam which attach to the solids and float them to the surface where they are skimmed off. However one of the more common issues with a DAF system is the mess associated and disposal cost and with handling the skimmed off waste solids.

For treating with the huge amount of Waste Solids, GN company offers reasonable solution to remove the Solid (suitable for discharge), and recollect the water and oil separately–Decanter Centrifuge plus Disc Centrifuge.

GN decanter centrifuge proves to be an effective and well proven equipment solution for dewatering the typically wet, sloppy solids skimmed off many DAF processes and wastewater systems.

GN supplies 250 sets of Decanter Centrifuges every year, with 70% purchased by the International Market, such USA, Canada, Holland, Australia, UK, Kuwait, Russia. It is 2 phase separation, for Solid and Liquid Separation.

 

After the solids being separated, if the client would like to recollect the high purified

Oil, Clean Water and separate the Fine Solids, GN suggest Disc Centrifuge. 

The Capacity can be from 1 m3/h to 15 m3/h, Bowl Speed reaches more than 6000 RPM.

Attention, the Solids Content of the feed material shall be 3% maximum.

Welcome to contact us, GN Solids Control, if you have problems with treating the DAF sludge. Our professional Technical Department would offer the exact solution based on your detailed requirement.

Tel, +86-316-5276989

Email, kevin@gnseparation.com

How to Deal with the Boring Animal Excrement

Before there is a friend from India, we met each other in local exhibition, he said that he ran a Cow farm, with more than 50 cows. Every day the biggest problem for him is how to deal with the huge amount of excrement? He couldn’t find more space in his farm to bury these excrement? It is always  a big headache for him.

Then I suggested him, maybe he can consider about our product, Decanter Centrifuge, the hot sale separation from GN Solids Control.

This special and professional can easily separate the Solid and Water.

At first, he didn’ t believe it, then I show him an video, he was amazing and exciting.

You can find the video from the Linkage below, from our company (no advertisement) http://www.gnsolidscontrol.com/video/gn-animal-waste-treatment-decanter-centrifuge/default

We, Hebei GN Solids Control Co., Ltd, is a leading manufacturer based in China and USA, specialize in separation equipment, include industry decanter centrifuge, solids control equipment, waste management equipment, and shaker screens.GN was established in 2007,and GN is the first API certified solids control equipment manufacturer from China, and GN products have been exported to over 60 countries around the world.

 

 

 

GN dewatering centrifuge for Tunneling in Singapore

GN dewatering centrifuge is working well for Tunneling in Singapore, our engineer just finished the first time installation and commissioning there and back to China. As per client’s request, our engineer can fly to the client’s site to support them for the first time installation, commissioning and training. If the equipments will work well or not, it will mostly depend on the proper maintenance and operation, we will train the client’s engineer how to operate it and how to do the maintenance.


The dewatering centrifuge system for Tunneling is to treat the waste mud / sludge/ water and reuse the water, the discharged solids should be dry enough to collect by bags then shipped by truck. The configuration is as below:
1) GNLW363-VFD decanter centrifuge is widely used for dewatering unit to treat the waste water
2) Chemical dosing system/ flocculation system
3) 20ft container with windows and doors.
4) Netzsch brand screw pump as the feeding pump of decanter centrifuge, which is the ideal feeding pump to control the frequency to control the flow rate, compared with centrifugal pump and slurry pump, it works more steadily.


Before feeding to the decanter centrifuge, we suggest the client to use a screen/ filter or high G drying shaker / desander / desilter before the dewatering centrifuge system, the purpose is to prevent course solids enter into the centrifuge and the screw will be damaged and centrifuge will be blocked. The core components of the centrifuge is the screw, GN centrifuge screw is completely made by stainless steel, and protected by tungsten carbide tiles, the fluids distribution port is protected by tungsten carbide alloy for wear resistant.
Continue reading “GN dewatering centrifuge for Tunneling in Singapore”

Meet Good manufacturer of decanter centrifuge at CIPPE 2018

If you are looking for a good manufacturer of decanter centrifuge, vertical cuttings dryer, shale shaker, shaker screens, welcome to visit GN solids control stand at CIPPE 2018 to check our equipments.
Our stand info is as below:


We will show our best sold model decanter centrifuge at the show. As the largest and most professional oilfield industry products and service exhibition in China, all of the manufacturers will show their most advanced technology during the show.


GNLW363CG-VFD decanter centrifuge is one of the best sold model for our international clients, it can be used for solids control system, drilling waste management system, industry waste water treatment, dredging slurry separation, dewatering system, barite recovery, Low gravity solids separation, etc.
GNLW553C-VFD decanter centrifuge is the best sold big bowl big volume centrifuge, it is normally used as dewatering centrifuge with chemical dosing system for waste water treatment, it can be used for all kinds of waste water treatment. Sometimes it is used for oil sludge treatment system when the clients need 20~25m3/h treating capacity.


We will also show vertical G dryer GNCD930, it works together with GNLW363CG-VFD decanter centrifuge as drilling cuttings treatment system for oil based mud.
4 panel shale shaker GNZS594E installed with composite material shaker screens, with longer service life and better performance. We produce shaker screens in our own workshop, so GN solids control can control the quality by our own quality control dept. without purchasing from other suppliers. We produce OEM shaker screens for own shaker and replacement shaker screens for US brand shale shaker, like Derrick, Swaco, Brandt, FSI, Kemtron, etc.


Continue reading “Meet Good manufacturer of decanter centrifuge at CIPPE 2018”

Meet Good manufacturer of decanter centrifuge at CIPPE 2018

If you are looking for a good manufacturer of decanter centrifuge, vertical cuttings dryer, shale shaker, shaker screens, welcome to visit GN solids control stand at CIPPE 2018 to check our equipments.
Our stand info is as below:


We will show our best sold model decanter centrifuge at the show. As the largest and most professional oilfield industry products and service exhibition in China, all of the manufacturers will show their most advanced technology during the show.
GNLW363CG-VFD decanter centrifuge is one of the best sold model for our international clients, it can be used for solids control system, drilling waste management system, industry waste water treatment, dredging slurry separation, dewatering system, barite recovery, Low gravity solids separation, etc.


GNLW553C-VFD decanter centrifuge is the best sold big bowl big volume centrifuge, it is normally used as dewatering centrifuge with chemical dosing system for waste water treatment, it can be used for all kinds of waste water treatment. Sometimes it is used for oil sludge treatment system when the clients need 20~25m3/h treating capacity.


We will also show vertical G dryer GNCD930, it works together with GNLW363CG-VFD decanter centrifuge as drilling cuttings treatment system for oil based mud.
4 panel shale shaker GNZS594E installed with composite material shaker screens, with longer service life and better performance. We produce shaker screens in our own workshop, so GN solids control can control the quality by our own quality control dept. without purchasing from other suppliers. We produce OEM shaker screens for own shaker and replacement shaker screens for US brand shale shaker, like Derrick, Swaco, Brandt, FSI, Kemtron, etc.


Continue reading “Meet Good manufacturer of decanter centrifuge at CIPPE 2018”