GN HDD System for Australia

In recent days,
GN will deliver to Australia a 500 GPM mud recycling system for HDD.
It is one of GN’s best seller products as the mud recycling system. And 500 GPM
is the most popular configuration among all the available configurations.

As is known to
all, Australian market for the equipments and machines are different from other
markets, because Australia has a even higher standard and more strict rules for
the machine or devices or the environment protection. Some laws and regulations
are even more strict than their peers like USA and European countries.


Although Australia
has such standards, GN Solids Control and GN
Solids Control’s equipments
was accepted by Australia. In fact, GN is
the first and only solids control manufacturer who provided to Australia.

Why GN Solids Control?
As a private owned company, GN has no special background or mother company to
be covered with. That’s why the quality is the most important thing. To win a
future and reputation is always what GN does for the past years, and for the coming
years also. Year in and year out, GN has developed from a small company to a
world well known brand.

In domestic
China, there are lots of HDD contractors who buy from GN, and they are giving
repeated orders because they found GN a reliable company with good quality
products. In outside China countries, GN provided to South America, to Asian
countries and to Middle East countries like Saudi Arabia.

When talking
about clients’ countries, we can not let go Saudi Arabia. Before meeting GN
Solids Control, the Saudi Arabia HDD companies only purchased from US brands,
for shakers, desander, desilters and complete
system. But they turned to GN for more cost-effective solutions, maybe at first
they just had a try, because they didn’t believe in some Chinese
manufacturers,. But later GN proved to them that there are high quality Chinese

And also, many
HDD rig companies are sourcing from GN to make rig package with GN mud
recycling systems.

For more
information of HDD, CBM or piling systems, welcome to contact us freely.

Related Arciels:

6 Sets of GN Decanter Centrifuge and 40 Sets Mud Agitator Delivered to South America Market

GN leads the way in solids control
technology with it new designed decanter centrifuge in
China. As the firstly API certified manufacturer of solids control equipment and
system in China
, GN has always been keeping its leading position in
international market by it advanced technology. Early in this year, GN has
improved its decanter centrifuge to make it more suitable to treat drilling
waste which contains relatively larger solids content. So GN made a series
specific design to reduce abrasion on the screw conveyor and avoid solids accumulating
inner the bowl cover. The new designed decanter centrifuge has been proven to
have stable operation and more satisfying performance, thus becoming popular in
the international market, especially in the Middle East and Africa, Latin
America. Recently GN delivered 6 sets of decanter centrifuge and 40 sets
agitators to South America. The new designed centrifuge also can be used as the
final stage solids control equipment in a complete set of solids control system for
oil and gas drilling.
The mud agitator is used to rotate the mud to
keep it homogenous.

Now GN is manufacturing one set of solids
removal unit for a South America customer. It will be used the clean the
diamond drilling fluids for recycling usage. Besides solids control systems for
oil and gas drilling, GN also designs and supplies desander unit for bore piling and TBM; mud systems for HDD
drilling, CBM drilling, water well drilling, geothermal drilling. The main
treating equipment is shale shaker and desander, desilter, or mud cleaner with
the combination of desander cyclones and desilter cyclones. The shaker is used
to separate coarse solids, and then the desander to separate solids over 40 micrions,
and the desilter to remove solids over 25 microns.

Two Sets Close Loop Drilling Waste Management System for Domestic Oilfield Project

Because of the more strict environmental regulation
on drilling project that no cuttings without treatment are allowed to be
discharged into directly into the pit and buried, almost all drilling sites
equip themselves with drilling waste management system.
In 2015, GN solids control, the international brand of solids control and drilling
waste management, has delivered to over 30 sets drilling waste management
equipment to China’s drilling site. Recently, another two sets of drilling
waste management equipment starts to operate in China’s oilfield drilling site.
For the drilling waste management, high G shaker is generally used to treat water based mud
cuttings as the first stage, and then the liquids will be fed into the high
speed decanter centrifuge for second stage treatment; vertical cutting dryer is
generally used to treat oil based mud cuttings as the first stage, and also the
second stage treatment machine is decanter centrifuge.

Since GN firstly designed and manufactured
the vertical cutting dryer in 2011, GN has many successful case now. One of
them is the oilfield service Giant Baker Huges ,who took 4 sets complete
drilling waste management system from GN and applied it in Siberia with very
low temperature at minus 40.
More cases: 
More videos:

With our 650,000 SF facility and advanced
processing machineries, GN produce the state of the art solids control and
waste management products. GN Solids Control is the first API certified
solidscontrol company in China, and GN is also certified by Europe DNV CE and
Russia TP RU as well as HSE system. Since GN Solids Control market position is
the middle and top level clients at home and abroad. So our main competitors
are from US and Europe, this put us to make the best quality products withthe
best material and technology

4 sets GNLW452 Centrifuge for fast barite recovery

GN Solids Control decanter centrifuge is professional for
oil & gas drilling, horizontal directional drilling, coal bed methane
drilling, diamond drilling etc. The centrifuge is liquid / solids 2-phase
separation equipment
, the separation point is 2 to 5 microns.


 Recently, we have customer from CPP, China petroleum
pipeline bureau company, the largest HDD contractor from China. They just buy 2
sets of
500gpm mud system
, each system equipped with 1 sets shaker with 2 ea desander
cones, 1 set shaker with 12ea desilter cones, 2 sets middle speed centrifuge
GNLW452. The middle speed centrifuge standard model is fixed speed centrifuge
with 1800RPM. The customer like customized centrifuge with variable speed
control panel. We company customized the fixed speed centrifuge to variable
speed centrifuge by adding one variable speed control panel with ABB transducer
inside to make the speed changeable. 1 set of GNLW452 centrifuge with treating
capacity 40m3/h, two sets means treating capacity 80 m3/h at same time. In this
case, the barite material in drilling mud can be take out by centrifuge very
fast. Thus, the total working efficiency will be promoted in a high level.

 Except of GNLW452 middle speed centrifuge, GN
Solids Control also have other model centrifuge for other application.

 1) GNLW363CG or GNLW363CG-VFD is high speed centrifuge,
fixed speed / variable speed two options for customer. This centrifuge is
professional for drilling mud weight reduce for solids control. Or it can be
used for drilling
waste management
to remove the very fine solids from drilling waste, thus to
reduce the oil on cuttings (OOC).

 2) GNLW553 big bowl big capacity centrifuge. If in some
certain case, the customer don’t want to use desander unit or desilter unit,
the customer may only use shale shaker & centrifuge for fast drilling. This
kinds of combination can also reduce the power consumption in a large degree. Because
when you use desander units or desilter units, big pump with electric motor is
generally needed.

 GN other model centrifuge, like GNLW223 baby centrifuge,
GNLW453 big bowl centrifuge is also available.

Related Arciels:

Dual Centrifuge mud system for CPP

GN Solids Control have many
production project for CPP from year of 2010. CPP is the largest HDD contractor
from China and engaged in China and overseas market. GN Solids Control compact
mud system and centrifuge is also working in many different jobsite with CPP

 Beginning of this year, we got 4 sets 500gpm mud recycling system for
CPP. Different from former system configurations, this time CPP require 2 sets
variable speed middle speed centrifuge for each system. In this case, they can
recover the barite from used drilling fluids fast. The centrifuge is GNLW452
big bowl middle speed centrifuge with variable speed control panel to adjust
the speed flexible.

 Except for 2 sets middle speed centrifuge,
other solids control equipment including:

1) 1 set Mud desanding cleaner GNZJ705-2S, with double deck shale
shaker GNZS705. It is for the first and second stage separation.

2) 1 set Mud desilter cleaner GNZJ705-12N,
with double deck shale shaker GNZS705.
It is for the first and third stage separation. 

3) 2 sets mud agitator installed on
centrifuge tank compartment, to avoid drilling mud settle down.

After double checking the whole system, you
can find the HDD mud system with 2 sets shale shaker, 1 set desander assembly ,
1 set desilter assembly, 2 sets centrifuge. The treating capacity is much
bigger and the drilling mud can go to desanding cleaner and desilter cleaner at
same time. The drilling fluids go into this two units via distribution box and
controlled by flange and valves. Generally, the actual treating capacity can
reach to about 800gpm to 1000gpm.

 GN Solids Control is famous solids control
equipment mfg from China with rich experience in compact mud system
fabrication. The different mud system capacity including: 500gpm mud system,
800gpm mud system and 1000gpm mud system.

 Except for small mud system for HDD, CBM,
TBM etc, GN also produce lots of oil drilling mud system every year for oil
drilling companies. If you need more support, pls contact us freely.